RF Multicouplers

TR30-162 is a series of broadband HF multicouplers with switchable dual antenna input ports directed to 8 or 16 output ports.Remote control over TCP/IP enables switch matrix configuration and pre-amplifier activation at each antenna input port.The performance is characterized by a low noise figure, highintermodulation products suppression and port to port isolation.19’ professional compact housing provides ultimate EMI shielding. Either the standard AC mains or an optional 24Vdc supply can be used for powering.

• Frequency range 1-30MHz,
• 2 antenna RF inputs ports and 16 RF output ports,
• Each antenna port is switchable to either 8 or 16 outputs (1/8 or 1/16 modes),
• Pre-amplifiers are ON/OFF remotely switchable at each input ports,
• 4dB nominal gain under 1 / 8 mode,
• Dynamic or static IP setting,
• MAC or IP address upgradable over RS232 port,
• Multitasking available at each individual 16 output ports,
• BNC type antenna input and SMA type RF output connectors,
• 220VAC powering.

TR3000-216 Multicoupler is our latest broadband, high performance unit designed for compatibility with wide frequency range signal collection and signal analysis systems requiring up to 16 outputs from a switchable dual antenna inputs.Remote control over TCP/IP enables switch matrix configuration and pre-amplifier activation at each antenna input port.BITE (Built-in test equipment) features as a part of the system to enable testing and perform diagnostics to support the maintenance and fault management.Performance is characterized by a low noise figure, high intermodulation products suppression and port to port isolation. 19’’ professional compact housing provides ultimate EMI shielding.Either the standard 28Vdc powering or 110/220VAC mains can be used for powering.

• Frequency range 20-3000MHz,
• 2 remotely switchable antenna RF inputs ports and 16 RF output ports,
• Pre-amplifiers are ON/OFF remotely switchable at each input ports,
• 8dB nominal gain,
• Dynamic or static IP setting,
• Built-in test equipment (BITE) for fault management,
• MAC or IP address upgradable over RS232 port,
• N type antenna input and SMA type RF output connectors,
• 28VDC powering.

TR500-18 is a series of broadband VHF multicouplers with single antenna input with directed to 8 outputs ports. Remote control over TCP/IP enables pre-amplifier activation whereas overall nominal gain is 1dB at normal mode.The performance is characterized by a low noise figure, high intermodulation products suppression and port to port isolation.N-type RF input and SMA type output connectors,19’professional compact housing provides ultimate EMI shielding.Either the standard 18-36Vdc DC powering or 110/220VAC mains can be used for powering.

• Frequency range 20-500MHz,
• Single antenna RF inputs ports and 8 RF output ports,
• Each antenna port is switchable to either 8 or 16 outputs (1/8 or 1/16 modes),
• Pre-amplifiers are ON/OFF remotely switchable at each input ports,
• 1 dB nominal gain
• Dynamic or static IP setting,
• MAC or IP address upgradable over RS232 port,
• Multitasking available at each individual 16 output ports,
• N type RF input and SMA type output connectors,
• 18-36VDCpowering.

DFAS3 series switching units are key component for Direction Finding (DF) systems.
DF systems are used to track and locate the source of any interfering signal. Basically DFAS3 unit is an antenna switching unit used in DF systems. The DF antennas are connected to the unit and with an external control; the antennas are switched to receivers.
The unit has calibration control capability in order to eliminate any deviations.

• Wide frequency range 20 MHz-3 GHz,
• Control, bias and RF signal over mil-spec circular connecters,
• Shielding and effective grounding of EMI via Gel Rope gaskets,
• Sealing against water ingress,
• Compact design (97mm x 194mm x 72 mm).