Over 10 years we help companies reach their financial and branding goals. Engitech is a values-driven technology agency dedicated.



411 University St, Seattle, USA


+1 -800-456-478-23


An RF switch matrix is the most efficient and cost-effective way to expand your wireless coverage, and can be a perfect solution for any location that needs to provide wireless access. Installing an RF switch matrix will give you greater flexibility with your wireless coverage, which is important when it comes to improving customer experience. It’s also a great option if you need additional capacity or want to expand your installation at a later date. A well-designed system can be reconfigured with minimal disruption and downtime, so it’s easy to change as your needs change.

RF switch matrixes are key to the proper operation of a radio network. The switch matrix manages the connections between each of the RF devices and provides a means of selecting which source of RF is to be routed to each of the antennas. Wireless networks have a lot of advantages over wired networks, but one major drawback is that they cannot route or amplify signals. In order for this to happen, you need an RF switch matrix. It allows for routing and amplification, while also providing protection from overloads and interferences. If you’re looking to build your own wireless network, then this guide will show you just how important an RF switch matrix is.

More Interested: DOCSIS 3.1

What is An RF Switch Matrix?

An RF switch matrix is a device that allows wireless radios to be connected to one antenna in order to save space and money. It also allows for the management of frequencies and power, which can lead to increased safety. For example, in television broadcasting, the use of an RF switch matrix can reduce the risk of interference from other broadcasts in the area.

TRDFAero-3000-16-6 Antenna Switching Unit
TRDFAero-3000-16-6 Antenna Switching Unit

The system connects different radio frequency (RF) devices to different antennae, allowing the user to transmit and receive on more than one frequency. It can be used in a variety of scenarios such as for broadcast stations, airports, and warehouses. The system may be either manual or electronic. It all depends on your needs. For example, if you’re working with a lot of frequencies and want to avoid interference, an electronic switch matrix might be the best option for you. But if you don’t need more than 2-4 antennas and want to save money, a manual switch matrix would work better for you.

Understanding RF Switch Matrix

RF Switch Matrix has been available in the market for several years now. And now, with the invention of Integrated Matrix Switches, the industry has progressed a great deal. And most importantly, its cost has been reduced drastically.

Here, we are going to discuss the basic application of RF Switch Matrix Switches and its various functions.

More Interested: RF Signal Distribution

The Benefits of Antenna Switching Matrix   

RF Matrix Switches can be used for 2-way switching. Depending upon the requirements, the switching frequency can be changed. For example, if we want a switch to control two wireless keyboards, the matrix switch can be used. And if we need a switch for a segment where there are 2-20 sections, then the RF Matrix Switch can be used.

There are benefits of Antenna Switching Matrix such as:

  • High Quality Switching Switches
  • Compact design providing good RF performance
  • Higher input signal processing accuracy
  • Switching operations are performed by microcomputers
  • Redundant switching facilities with output products
  • Multiple Lines Output Step-by-step on-screen guide to configure a single or several antennas
  • Record in a word processor and store in USB flash drive for future reference
  • Easy programming of matrix switching
  • ECC with trusted boot software
  • Blue PCB and color LCD
  • Eclectic Reflector Filter: Resistance Overload RMX channels used in RF communication are in direct ratio to their power level. To obtain optimal efficiency, voltage levels between the transmitter and the antenna are usually below a certain threshold.

How Does It Work?

Switching occurs by direct digital signal processing. A serial data is transmitted from the RF source to the input pin of a switch. This serial data is decoded and the input pin is fed back to the RF signal path. Normally, you would apply direct-sequence spread spectrum (DSSS), but that is not necessary as the square-wave signal is the binary language and no conversion will be necessary. The circuit can also be implemented using op-amps. The output of an op-amp is directly fed to the output pin of a switch. Every switch has its own control, status and reset pins. Every pin has its own analogue for the digital signal. The main pin of the switch has the input pins of the digital input of the control board.

Why It’s Important Antenna Switch Matrix

The easy to use control panel provides you with instant response to the operation. There are other reasons why it is important:

Multiple Switches: All antennas and transmitters are allowed to use the same mode.

Antenna Switching System: Uses different kinds of antennas to transmit or receive different wave lengths.

RF Switch Switches: Used to convert between transmit and receive mode.

Protective Design: Antenna Switching Panel prevents damage to electronics, personnel and equipment.

Easy Installation: Easy to set up and easy to use, this is made from good quality materials.

Upper and Lower Housing: The Upper housing can be secured to a surface and the Lower housing can be mounted on a platform.

Checking and Powering: Controlled by operating equipment and easy to program.

If you have any other questions about RF Switch Matrix, please feel free to contact us.

Leave a comment

Your email address will not be published.